9 pin D-SUB male connector at the cable
9 pin D-SUB male connector
This pinout is for a “sony” type 422 control of an alesis box, in addition to the “ADAT SYNC”.
The source “ADAT SYNC” is straight through, but it is not a “422″
pinout. There are four pairs of diffrering signals. Word clock, time
code, control data, response data. pin 1-shields, pins 2&6 paired,
pins 3&7 paired, pins 4&8 paired, pins 5&9 paired.
The interface connector is a 9-pin D-subminiature female connector. The
pin assignment for the CONTROLLER and DEVICE is as shown in the
|Receive A||2||2||Transmit A|
|Transmit B||3||3||Receive B|
|Transmit Common||4||4||Receive Common|
|Receive Common||6||6||Transmit Common|
|Receive B||7||7||Transmit B|
|Transmit A||8||8||Receive A|